In addition Galvanized Metal OEM Custom design Stamping Parts to the floor plans you order, you may also need a site plan that shows where the house is going to be located on the property. If you are building in these locations, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. Examples of this would be earthquake-prone areas of California and the Pacific Coast, hurricane risk areas of the Florida, Gulf & Carolina Coasts. This normally involves filling out a simple form providing documentation that your floor plan is in compliance. Your contractor can usually help you with this.

In most areas of the United States, purchasing a stock floor plan package from an Internet website and/or from a house plan catalog will include all documents that you will need to build the house.One question that we receive almost every day is whether or not the floor plans package for plan XXXX contains everything that a person would need to build the house in the state of "XXX". You may also need a septic design unless your lot is served by a sanitary sewer system.  However, if you think that you will be making significant changes, its probably a good idea to select a "Reproducible", "PDF File", or "CAD File" floor plan package and seek the services of a local building design professional. 

If you would like to learn about more of the most frequently-asked floor plan questions, visit us online at.

Just remember that, many times, minor changes and material substitutions can be made, onsite, by a professional builder without the need for floor plan revisions. In some cases, certain regions of the country also have area-specific energy codes that also need to be followed. If your building department requires one, they may only accept a stamp from a professional licensed in the location where you plan to build. 

Finally, it is always a good idea to check with your local city, municipality, and state building authorities to ensure that your home construction will meet all applicable building codes. 

Additionally, stock floor plans do not have a professional stamp attached. In addition, floor plans which are used to construct homes, in certain states, are required to be drawn by a licensed architect in that state.com/index_files/house-plans-faq. In this case, you will need to take your floor plans to a local engineer or architect for review and stamping. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well.houseplangallery.. 

Hopefully, the above information will provide you with a good basis for evaluating your particular floor plan situation. Some areas of North America have very strict engineering requirements.  As such, we wanted to provide some additional information to clarify the subject.php

.  However, in certain regions of the country, a person may also be required to obtain additional design details and/or plan modificationsto obtain a building permit. 

In some regions, there is a second step you will need to take to insure your floor plans are in compliance with local codes. If you arent sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit. You might also need beams sized to accommodate roof loads specific to your region..   In the majority of cases, a stock floor plan package will still provide a significant cost-savings when compared to a corresponding set of custom floor plans from a local building design professional